Sunday, 25 May 2008

SFX Work - Part 5 - Tracking and Compositing

During the filming process it was established that the wires we had obtained for the film were inadequate and too thin. Therefore we decided that they composited in later into the normal shots. This later became an exercise in tracking and compositing skills.

I took the footage imported it into Adobe After Effects for exporting into the 3d tracking program voodoo which allows for exporting tracking data into various 3D packages.



The rendered Tga files were then imported into Voodoo for motion tracking with specific settings such as tripod camera movement being established as one used during filming.



Voodoo Software available at: http://www.digilab.uni-hannover.de/docs/manual.html

With the tracking data completed I was able to export the tracking data as a 3D Max script and import it into 3D Max using the "Run Script" command. This set up a virtual camera and the tracking points within Max's viewports so that I could compose the elements for the scene before exporting into AE for further editing. I changed the viewport display the footage of the particular scene for reference when animating and positioning.








With the scenes set up in Max I rendered the key objects out as PNG files to retain each frames transparency/alpha channel for compositing. In after effects I imported the png frames and the footage for the particular scene to composite the 3d elements and the live action footage together. A key issue that arose during this entire process was the footage quality and lighting within each scene, I did what I could to compensate but it caused issues in tracking and meant I had a harder task of blending the CG elements with the footage. I generally made several passes using voodoo adjusting the settings accordingly but some scenes were to distorted to make use of for tracking. I made initial tests for each scene to check before going deep into compositing for them. Below is an example of one of the test scenes, which also allowed me to experiment with effects and distortion techniques to help blend the footage and CGI.




The loss in tracked scenes may cause some scenes to be cut, which is undesirable but will look better overall instead of having the odd scene with poor tracking composites. With the effects necessary established I finalised the components for each scene and rendered out the composites in After Effects.

Later I modelled and animated the initial hallway scene for the film, which once it received some initial editing began to look realistic and will work well for the final piece, I later passed on the composited footage onto Darryl for the final editing stages i.e. cutting scenes, adding sound, re-evaluating existing scenes etc.

Thursday, 22 May 2008

SFX Work - Part 4 - CGI preps

After Darryl had edited the raw footage I was given the cut up scenes for compositing. Darryl had also added a few adjustments to the footage, which included colour alterations and framing.

At this stage post production was all planned but there was still room for some experimentation which I initially attempted in AE. The main effect of the whole piece was to place a CG speaker in the actors mouth as well as surround him with wires. With this in mind at an early stage before filming I knew that a considerable amount of masking and motion tracking was necessary for the effect to work.

I began initial tracking tests to see how well the footage would work using A.E's tracking tools. This would help me test the footage quality and areas that previously assigned tracking markers and points established during filming.

Below is one of the test tracking shots:



After viewing the results and going over the footage, I found that there are a few jitters in the video that will effect the tracking points and will have to be compensated for in the final piece. AE's tracking is generally used for 2D therefore the program Voodoo will have to be utilised to create the 3D tracking information necessary for me to export into 3Ds Max.

Within 3D Max I had already begun modelling and texturing within 3Ds Max of the key CG objects in the film, which were the bottle and the speaker.

Below are the renders and test renders I made of the objects:






Textures for the speaker were altered several times as initially it was going to have a clean but slightly dark metal texture. But I then realised that the speaker had to appear as if it had been in the character's mouth for a long time, therefore it would have been subject to scraping, water damage as well as being exposed to the acids within his mouth/saliva. I then began to gather different textures mainly from the site UrbanDirty.com. I had still to add the wires but I was going to add them whilst I imported the footage into 3DMax so that I could get their placement correct for each scene, which I was initially going to test with stills from the edited footage.

Monday, 19 May 2008

SFX Work part 3 - Filming

Filming began on a Friday, after we had booked the camera just before the weekend so that we had time to film and make any adjustments without too much pressure for time. Our actor was a flatmate that Darryl convinced to volunteer for the part (Patrick). Darryl had perpared the set and directed the shots accordingly as we interchanged in filming responsibilities. We initially began filming the scenes without the actor for convenience and later shot the scenes with him in them all in one go thus not shooting in sequence with the storyboard but rather economically. Shooting took place in the basement of Darryl's shared accommodation which worked well for the tone and visual elements for the film.

Later on technical issues exporting the footage via firewire cost us a few scenes near the start of the film and as we lost a few of the initial shots taken. With the footage we still had left Darryl (who was assigned for editing) took the raw footage and edited it into seperate scenes for me to later add the CG elements to.


Below are several stills from the raw footage:






Sunday, 18 May 2008

SFX Work Part 2

I began in After Effects with the concept clear in my mind but still tried out various effects in AE to achieve different looks.





Above Images reference available at:

http://www.tastyvenison.com/pics/Hallway2.jpg
http://media-cdn.tripadvisor.com/media/photo-s/01/05/b6/66/davenport-hallway-fifth.jpg
http://allthingsnu.files.wordpress.com/2007/09/closetdoor-crpd.jpg

[accessed 14th April 2008]

I initially experimented with colours and overall tone using numerous images including the ones above as reference in terms of colour palette as well as shot angles I could still play around with in AE.



Above shows the red tone similar to that in the 2nd reference picture that I toyed with, but I felt as if this was too blunt in terms of defining the mood and the desired tone was more mysterious and offbeat. So I settled on the tones closer to Darryl's original colours with slight adjustments to the hue and saturation to enhance the colours (as shown below).




I then began animating using the inbuilt 3d function to help me move across the frames and for the initial hallway sequence. Prior to this I worked on the titles for the animatic which was discussed that it would be used for the final short film. I used the site http://freesound.iua.upf.edu/ as a resource for the various sound effects and music within the animatic, and this was also discussed that most of which would be carried across or referenced for the final film piece.

Here is the final animatic created: (compressed with WMV9 codec)


Friday, 16 May 2008

SFX Work

For our SFX piece I worked in a group which consisted of me and Darryl. Our initial ideas were broad, but the main theme we wished to cover encompassed many dark elements and overtones. This was a common ideal we had for the final piece we wished to create and we referenced different visual references from different sources to help establish the look of the short film we were to create.

With that decided and our initial idea planned, we divided the tasks and roles within production. It was decided that I would create the final storyboard from the rough version we created and Darryl would add colour for use in an animatic.






Above are some sample frames (pre colour) from the final storyboard that I drew and scanned, which I later gave to Darryl to add colour. It was established that I would also be animating the final coloured animatic within After Effects. This involved animating the scenes and experimenting with sound effects and visual effects for the desired result. The aim was to create a clear idea of how the final piece will look and evaluate scenes.